Tilting mechanisms in domino faults of the Sierra de San Miguelito, central Mexico

Authors

  • S. Xu
  • A.F. Nieto-Samaniego
  • Susana A. Alaniz-Álvarez

DOI:

https://doi.org/10.1344/105.000001426

Keywords:

Strain, Normal fault, Rigid-body rotation, Vertical shear, Mexico

Abstract

A system of normal faults with similar strike that bound rotated blocks in the Sierra de San Miguelito, central Mexico, was studied to determine the genesis of rotation and to estimate the extensional strain. We show that rigid-body rotation was not the main deformation mechanism of the domino faults in this region. We propose vertical or inclined shear accommodated by slip on minor faults as the mechanism for strain in the blocks. In order to test quantitatively the amount of strain, we calculated the extension assuming vertical shear obtaining ca. ev ~0.20. This value is in good agreement with extensions previously reported for the Mesa Central of México. The bed extension required in this model reaches ca. 33% of the total horizontal extension (i. e. ebed =0.34 ev). Assuming self-similar geometry for fault displacements, it is shown that bed strain required in shear models can be liberated by the small faults. If the strain is calculated using the rigid-body rotation model, the lengthening is underestimated by up to 9%. This case study shows that shear models could be applied in volcanic zones.

References

Alaniz-Álvarez, S.A., Nieto-Samananiego, A.F., Tolson, G., 1998. A graphical technique to predict slip along a preexisting plane of weakness. Engineering Geology, 49, 53-60.

Aranda-Gómez, J.J., McDowell, F.W., 1998. Paleogene extension in the Southern Basin and Range Province of Mexico: Syndepositional tilting of Eocene red beds and Oligocene volcanic rocks in the Guanajuato mining district. International Geology Review, 40, 116-134.

Childs, C., Watterson, J., Walsh, J.J., 1995. Fault overlap zones within developing normal fault systems. Journal of Geological Society of London, 152, 535-549.

Clark, R.M., Cox, S.J.D., 1996. A modern regression approach to determining fault displacement-length scaling relationships. Journal of Structural Geology, 18, 147-152.

Cowie, P.A., Scholz, C. H., 1992. Displacement-length scaling relationship for faults: data synthesis and discussion. Journal

of Structural Geology, 14, 1149-1156.

Davis, G., Reynolds, S.J., 1996. Structural geology of rocks and regions. New York, ed. John Wiley and Sons Inc., second Edition, 779 pp.

Dawers, N.H., Anders, M.H., Scholz, C.H., 1993. Growth of normal faults: Displacement-length scaling. Geology, 21, 1107-1110.

Dula, W.F. Jr., 1991, Geometric models of listric normal faults and rollover folds. American Association of Petroleum Geologists Bulletin, 75, 1609-1625.

Ferrill, D.A., Morris, A.P., Jones, S.M. Stamatakos, J.A., 1998. Extensional layer-parallel shear and normal faulting. Journal of Structural Geology, 20, 355-362.

Ferrill, D.A., Stamatakos, J.A., Sims, D., 1999. Normal fault corrugation: implications for growth and seismicity of active normal faults. Journal of Structural Geology, 21, 1027-1038.

Gibbs, A.D., 1984. Structural evolution of extensional basin margins. Journal of the Geological Society, 141, 609-620.

Gibbs, A.D. 1989. Structural style in basin formation. In: Tankard, A.J. Balkwill, H.R. (eds.). Extensional tectonics and stratigraphy of the north Atlantic Margins. Memoir American Association of Petroleum Geologists, 46, 81-93.

Jackson, P., Sanderson, D.J., 1992. Scaling of fault displacements from the Badajoz-Cordoba shear zone, SW Spain. Tectonophysics, 210, 179-190.

Krantz, R.W., 1988, Multiple fault sets and three-dimensional strain: theory and application: Journal of Structural Geology, 10, 225-237.

Labarthe-Hernández, G., Jiménez-López, L.S., 1992. Características físicas y estructura de lavas e ignimbritas riolíticas en

la Sierra de San Miguelito S. L. P. Universidad Autónoma de San Luis Potosí, Instituto Geología, Folleto técnico (Open File Report) No. 114, 31 pp.

Labarthe-Hernández, G., Jiménez-López, L.S., 1993. Geología del domo Cerro Grande, Sierra de San Miguelito S. L. P.

Universidad Autónoma de San Luis Potosí, Instituto Geología, Folleto técnico (Open File Report) No. 117, 22 pp.

Labarthe-Hernández, G., Jiménez-López, L.S., 1994. Geología de la porción sureste de la Sierra de San Miguelito S. L. P. Universidad Autónoma de San Luis Potosí, Instituto Geología, Folleto técnico (Open File Report) No. 120, 34 pp.

Labarthe-Hernández, G., Tristán-González, M., Aranda-Gómez, J.J., 1982. Revisión estratigráfica del Cenozoico de la parte

central del Estado de San Luis Potosí. Universidad Autónoma de San Luis Potosí, Instituto de Geología, Folleto Técnico (Open File Report) No. 85, 208 pp.

Maerten, L., Willemse, E.J.M., Pollard, D.D., Rawnsley, K., 1999. Slip distributions on intersectioning normal faults. Journal of Structural Geology, 21, 259-271.

Maldonado, F. 1990. Structural geology of the upper plate of the Bullfrog Hills detachment fault system, southern Nevada.

Geological Society of America Bulletin, 102, 992-1006.

Mandl, G., 1988. Mechanics of tectonic faulting. New York, ed. Elsevier, 408 pp.

Marrett, R., Allmendinger, R.W., 1990. Kinematic analysis of fault-slip data. Journal of Structural Geology, 12, 973-986.

Marrett, R., Allmendinger, R.W., 1991. Estimates of strain due to brittle faulting: sampling of fault populations. Journal of

Structural Geology, 13, 735-738.

Marrett, R., Allmendinger, R.W., 1992. Amount of extension on “small” faults: An example from the Viking Graben. Geology, 20, 47-50.

McClay, K.R., 1990. Extensional fault systems in sedimentary basins: a review of analogue model studies. Marine and Petroleum Geology, 7, 206-233.

Nicol, A., Walsh, J.J., Watterson, J., Bretan, P.G., 1996. Three dimensional geometry and growth of conjugate normal faults. Journal of Structural Geology, 17, 847-862.

Nieto-Samaniego, A.F., Alaniz-Álvarez, S.A., 1997. Origin and tectonic interpretation of multiple fault patterns. Tectonophysics, 270, 197-206.

Nieto-Samaniego, A.F., Alaniz-Álvarez, S.A., Labarthe-Hernández, G., 1997. La deformación cenozoica poslaramídica en la parte meridional de la Mesa Central, México. Revista Mexicana de Ciencias Geológicas, 14, 13-25.

Nieto-Samaniego, A.F., Ferrari, L., Alaniz-Álvarez, S.A., Labarthe-Hernández, G., Rosas-Elguera, J., 1999. Variation of Cenozoic extension and volcanism across the southern Sierra Madre Occidental Volcanic Province, México. Geological Society of America Bulletin, 111, 347-363.

Opheim, J.A., Gudmundsson, A., 1989. Formation and geometry of fractures and related volcanism of the Krafla fissure swarm, northeast Iceland. Geological Society of America Bulletin, 101, 1608-1622.

Pickering, G., Bull, J.M., Sanderson, D.J., 1995. Sampling power-law distributions. Tectonophysics, 248, 1-20.

Poulimenos, G., 2000. Scaling properties of normal fault populations in the western Corinth graben, Greece: implications

for fault growth in large strain setting. Journal of Structural Geology, 22, 307-322.

Scholz, C.H., Cowie, P.A., 1990. Determination of geologic strain from faulting using slip measurement. Nature, 346, 837-839.

Scholz, C.H., Dawers, N.H., Yu, J-Z., Anders, M.H., 1993. Fault growth and fault scaling laws: Preliminary results. Journal of Geophysical Research, 98, 21951-21962.

Stewart, S.A., Argent, J.D., 2000. Relationship between polarity of extensional fault arrays and presence of detachments. Journal of Structural Geology, 22, 693-711.

Tolson, G., Alaniz-Álvarez, S.A., Nieto-Samaniego, 2001. ReActiva, a plotting program to calculate the potential of reactivation of preexisting planes of weakness. Instituto de Geología, Universidad Nacional Autónoma de México,

http://geologia.igeolcu.unam.mx/Tolson/SoftWare/ReActivaV24En.exe.

Walsh, J., Watterson, J., Yielding, G., 1991. The importance of small-scale faulting in regional extension. Nature, 351, 391-

Westaway, R., Kusznir, N., 1993. Fault and bed “rotation” during continental extension: block rotation or vertical shear? Journal of Structural Geology, 15, 753-770.

White, N.J., Jackson, J.A., Mckenzie, D.P., 1986. The relationship between the geometry of normal faults and that of the sedimentary layers in their hanging walls. Journal of Structural Geology, 8, 879-909.

Yielding, G., Needham, T., Jones, H., 1996. Sampling of fault populations using sub-surface data: a review. Journal of Structural Geology, 18, 135-146.

Yin, Z.M., Ranalli, G., 1992. Critical stress difference, fault orientation and slip direction in anisotropic rocks under nonAndersonian stress systems. Journal of Structural Geology, 14, 237-244.

Downloads

Published

2004-01-13

Issue

Section

Articles

Most read articles by the same author(s)