Measurement technics (Article in French)

Authors

  • P Menghini Universita di Pavia
  • G Marlati Université de Pavie-I.R.C.C.S. Sang périphérique Matteo-Département de Disciplines Odontostomatologiques

Abstract

Aim of the research has been the evaluation of an image processing technique suggested for measuring procedures in the field of dental materials and devices studies. An analysis of measurement systems and largest employment's equipments in the biotechnologies field has been performed. Particularly, digital and image processing technologies have been considered and, between them, an evaluation of ";Image Tool"; software, made by UTHSCSA and available freeware on Internet has been carried out. The ";Image Tool"; software showed to be easy in handling and reliable on this results. Since it is based on image processing, the measuring precision is related to subject to be evaluated dimensions and always in the 1/1000 tolerance. This software also allow the direct surfaces measuring and comparing. The process accuracy is at the same level of mechanical regulation's measuring instruments (calipers, micrometres, surface probes) but it is not comparable to the laser controlled equipments, like CAD-CAM systems, micrometres and surface explores, precision which are much more sophisticated and expensives.

Downloads

Published

2008-12-20

Issue

Vol. 42 No. 2 (2000)

Section

Original Research Articles

License

I hereby certify that the authors of the above manuscript have all:

1. Conceived, planned, and performed the work leading to the report, or interpreted the evidence presented, or both;

2. Written the report or reviewed successive versions and shared in their revisions; and

3. Approved the final version.

Further, I certify that:

1. This work has not been published elsewhere and is not under revision in another journal;

2. Humane procedures have been followed in the treatment of experimental animals (if applicable);

3. Investigations in humans was done in accordance with the ethical standards of the responsible committee on human experimentation or with the Helsinki Declaration (if applicable).

4. This paper has been carefully read by a native English speaker who is familiar with the field of work (this applies to authors who are not fluent in English); and

5. The copyright of the article is transferred from the authors to the Bulletin du Groupement International pour la Recherche Scientifique en Stomatologie et Odontologie upon acceptance of the manuscript.